Changes in Hmi. 1.3.1.28547 =========================== * Bug fixed: Phase balance filter uses Furnace RatedMVA to work with small furnaces Changes in Hmi. 1.3.1.28304 =========================== * Bug fixed: Furnace Overview - The PigIronweight was added twice in the display of TotalWeight * Bug fixed: The Vibration event was being displaied as tent * Bug fixed: Event log viewer threw an exception when changeing chart types Changes in Hmi. 1.3.1.27856 =========================== * Bug fixed: HMI Power Curves Screen error at selecting the charts. Changes in Hmi. 1.3.1.27603 =========================== * Bug fixed: HMI Download from server was missing some files. * Bug fixed: Furnace taps uses the last available tap information when inserting new taps Changes in Hmi. 1.3.1.27397 =========================== * Bug fixed: In external data, the load of the statistics grid now loads its content. * Bug fixed: In external data chart, the variables are selected corrctly now and search works in as expected. Changes in Hmi. 1.3.1.26951 =========================== * Created DiagnosticsDB2 web page to query events in different days. The page has two calendars for start and end date, the query is performed in each day of the period and the results are added together chronologically, the sort order of the query if specified is not applied to the multi-day result set. Power Curves: Bug fixing and new features * Bug fixed: CreateSamplesSeries method was previously commented causing non series initialization. * Bug fixed: PowercurveDataView close button event was not handled. * New feedback icon at the status bar with valuable information when a Electrical System or Furnace Type models are incomplete or had invalid values. ShortCircuit Report * New feedback icon with valuable information when a Electrical System or Furnace Type models are incomplete or had invalid values. Changes in Hmi. 1.3.1.26846 =========================== * New Online Help based on a Single Web Page. SQLite-based Online help files deleted. Changes in Hmi. 1.3.1.26819 =========================== * Fixed Power On Column at Heat Sheet - Events * Fixed a potential incorrect message at temperature samples in overview screen. Changes in Hmi. 1.3.1.26059 =========================== * Improvements in PhaseBalance Screens. * Added Balance column in statistics grid * Blur option for XYColor charts * Fixed a potential model corruption in the model Undo button * Fixed External Data loading issues * Fixed miscellaneous Event Log Viewer issues Changes in Hmi. 1.3.1.25751 =========================== * Fixed a problem that prevented the save of the PhaseBalance Calculations * Fixed a problem in the calculation of the non filtered registries in phase balance Changes in Hmi. 1.3.1.25735 =========================== * Fixed a problem that prevented the creation of the Phase Balance repository Changes in Hmi. 1.3.1.25710 =========================== * Fixed the process that collects the data packages from the electrode speed tests * Added Electrode Speed Tests categories at load dialog. They are now separated into successful and failed / aborted. * Fixed the export of the Phase Balance Data Changes in Hmi. 1.3.1.25640 =========================== * Fixed a potencial corruption problem with models Changes in Hmi. 1.3.1.25599 =========================== * Fixed problem with heat sheet database that invalidated the TimeLine. Changes in Hmi. 1.3.1.25441 =========================== * Fixed format of data exported from Electrode tests to include milliseconds * Increased capacity of heat series to 60000 (up to 6 years of heats) * Changed web service timeout of Event Log charts to 10 min * Fixed problem with heat sheet trends chart to update only if date range changed * Fixed arrangement of heat sheets for multi-year queries * Fixed problem when opening CSV files (event export file) to show the appropiate Variable Selector * Fixed problem with variable filtering * Fixed problem to avoid opening a heat chart of the wrong heat * Fixed problem with timeline when connecting to old web servers * Fixed problem where log Processor main thead was not calling BalanceProcessor. BalanceProcessor added to calling processors list. * Set PlatformTarget to x86 in order to avoid problems loading (shipped SQLite.DLL that is x86) in x64 operative systems. Changes in Hmi. 1.3.1.25050 =========================== * Bug fix. NCC Setpoint display – value was divied by 10 when decimals configuration is zero. * Bug fix. Balance Screen – Reset button throw an exception. Changes in Hmi. 1.3.1.25036 =========================== * Timeline screen fixes. Changes in Hmi. 1.3.1.24747 =========================== * Latest temperature samples panel at the Overview screen. * Temperature, C, Ppm columns added to events grid at the Performance Heat Sheet screen. Changes in HMI 1.3-1.24105 =========================== * New User Defined Variables screen in Comm Setup * Minor bugs fixed - Regulator Profile screen: item size - Histogram chart: X scale - DataHandling: Keep state of selected variables for each chart type. - Configuration Cache win service: Connection problem might cause problems with HmiServer module on regulator. Changes in HMI 1.3-1.23797 =========================== * Limits the timeout time and number of tries in Trends and ConfigurationCache services * Bug fixed. LogPackageExists - WebClientCache expiration time reduced. * Fixed: app_offline.htm removed ........ * Balance Screen and Processor * Model Modification Timestamp transform To local Time for display. * Bug fixed: DateTime kind property added in order to make rigth convertion to localtime for display and tooltip. * Bug fixed: VMEIO Channel swaping at model edition on HMI * Minor fixes in map. Changes in HMI 1.3-1.23127 =========================== * Bug fixed: Removed last-10-tests restriction on Electrode Test selection screen. It will allow display of up to 1000 tests. BugzID: 2979 Changes in HMI 1.3-1.22985 =========================== * Avg curve removal fail when same or other variable with the same name has been added. * PreemptiveCaveIn status, count and time available in event logs * Shaper Preemptive CaveIn can disable use of FastRaise valve * VmeIOConfiguration model validated when model's timestamp changed, it always happened when user open the screen or any other user make a change and save the model. * Validation added to VmeIOConfiguration model before save - check for duplicate channel name or number or if a "built-In" channel name is not present. * Async heat browsing support. * If Twin shell, navigate only through selected shell. * Fixed a problem in event log charts, the user could add but not remove Average pencils Changes in HMI 1.3-1.22761 =========================== * OvercurrentTimeToTrip support added. * Bug fixed: Fixed heat navigation in Scatter charts. * Bug fixed: Avoid exception thrown by an edition in a deleted DataLine. * Fixed documentation for ExternalPresseure in input map Changes in HMI 1.3-1.22692 =========================== * Bug fixed: Fixed memory problem in the Heat Sheet Report screen. Changes in HMI 1.3-1.22528 =========================== * Bug fixed: Scatter chart display correction when switching variables and moving between heats / time HMI 1.3-1.22528 =========================== * Bug fixed: Exported from heat chart was corrupt * Bug fixed: Heat timeline built from heatsheets table * Wrong Regulator - Heat Sheet Report display caused by a wrong merge fixed * Fixed unhandled exception in Source Impedance processing Changes in HMI 1.3-1.22202 =========================== * Fixed unhandled exception in Source Impedance processing BugzID: 2958 * Added HeatSheet display for ShadowMode as Other, including the percent of time it was running in Shadow mode BugzID: 2957 * Added HeatSheet.ShadowModePwrOnPercent, percentage of time that the PX3 ran in Shadow mode Removed spurious Bounce fields BugzID: 2957 Changes in HMI 1.3-1.22161 =========================== * Bug fixed: Fixed unhandled exception in Source Impedance processing * Added HeatSheet.ShadowModePwrOnPercent, percentage of time that the PX3 ran in Shadow mode Removed spurious Bounce fields * Added HeatSheet display for ShadowMode as Other, including the percent of time it was running in Shadow mode * Added HeatSheet.ShadowModePwrOnPercent, percentage of time that the PX3 ran in Shadow mode * Removed spurious Bounce fields Changes in HMI 1.3-1.22154 =========================== * Bug fixed: Twin Shell fixes and features. Changes in HMI 1.3-1.21927 =========================== * Bug fixed: Spell error at "Substation" string. Prevents an unhandled exception in the Substation tab within the Electrical System section. Up to HMI 1.3-1.19340 =========================== * Bug fixed: Number of taps, backward support. * Bug fixed: Memory usage improved. Series allocation will be size fixed to retrived data size. * Bug fixed: ExternalLoopDisabled alarm restored * Bug fixed: Dynamic NCC setpoint rescaled dynamically - Bug fixed: VmeIOConfiguration model requested at data binging * Bug fixed: IndexOutOfRangeException fixed. * Bug fixed: Dynamic NCC setpoint rescaled dynamically * Bug fixed: ScaleFactor calculation for wide format display * Bit renamed to Operation.ShadowMode (inputs updated) Display "Other" when a bit for Shadow Mode. Bit renamed to Operation.ShadowMode * /Lb/Lc & Mab,Mbc,Mca hidden from user. * Bug fixed: Wrong handling of the new property "NumberOfTaps". backward compatibility * Plot calculation adjusments, visual adjusments * Feature: New Discretize Color axis, CustomZedGraph now setup discretize x,y and z series. * Bug fixed: ZedGraph Line and Symbol preferences editors. * Bug fixed: Miss columns added to HeatSheets table * Reload button added to grid views (Modification History) * Custom Series data added to export file. * GroupingGridControl by Syncfusion implemented in Modification History screen * Feature: Let move a variable to a particular group (category). I2TMwh moved to Electrical * Bug fixed: Link button in Performance Heat Sheet was pointing to old Power Curves screen. * Shadow Mode variable in map added to help. * Code Clean up * Bug fixed: Default sort orientation (ASC) for versions list (Modification History) * Tool tips added * Bug fixed: Disposing controls referenced in a dictionary member. * Bug fixed: Validation to avoid navegate after current heat number * Bug Fixed: Disposing controls to avoid memory and user object leaks * Bug fixed: because a bad Chart model clearence inside EventLogViewer inasmuch as it is received by reference in the constructor caller class should manage the this IChartModel instance. * Added help message to RphToCsv tool BugzID: 2798 * Bug fixed: OutOfMemoryException handling. ModelManager will try to allocate the Serie (array of doubles) if it fails then will close prevous oppened screens in order to release memory. A memory wastage fixed in PowerCurves screen, when allocating char... * Bug fixed: The csv columns names are translated into an internal name Object_Variable in order that all variables be found. * Bug fixed: VmeIOConfiguration model requested at data binging * Minor layout imporvements * XYColor scaling removed from scale selector. * Bug fixed: at XYColor scale (auto). * Bug fixed: Wrong call to CreateEventRulers when in a XYColor chart. * Bug fixed: Resolving expresion variable paths. * Bug fixed: Cross-thread bug between data update and paint calls, fixed. * Bug fixed: ExternalLoopDisabled alarm restored * Bug fixed: Exception handling in input_PreviewInputValueUI * Bug fixed trying to delete custom variables * Bug fixed: Filtering non-exportable variables (columns in BD), Changing Contains("id") to Equals("id") * Bug fixed: Manually load KernelMessage Table with DataReader. Force default Decimal columns to Double C# types for safety reasons. Bug fixed: DbNull handling * Bug fixed: Event Browser - Heat Number display when heat number is only one digit. * Bug fixed: EventLogViewer initial state - Selection and Averages 3ph var definition problem * Bug fixed: EventLogViewer unhandled exception - SingPh transients. Fixed. * Bug fixed: EventLogViewer grouping - DEBUG messages. It was a race condition when recreating series. * Bug fixed: Transient Variable Selector initial state bug fixed. * Bug fixed: Event Browse selection ignored the first time bug fixed. * Documentation fixed: External Loop Disabled bit is now included * Documentation fixed: SmartARCInputs BalanceSP uses two decimals